Redundancy Switching System - RSS
|
- General
- System Components
- Control Options
- Specifications
- Support
- Learn More
Physical Layer Switching for a Networked World |
-
Automatic Protection Switches
- Serial Fallback Switches
- Computer Telephony Redundancy
- IP Controlled Switching
- High Availability Networks
- Fail-Soft Operation
|
-
Remote Controlled A/B Switches
- Hot Standby Configurations
- Redundant Circuit Switching
- Web Browser Controlled
- SNMP Managed
- Layer 1 Protection Switches
|
Learn More about
Redundnacy Switching
 |
|
4U 20 slot chassis |
1U 5 slot chassis |
|
Dataprobe's Redundancy Switching System (RSS) provides reliable switchover of communications circuits for line protection and equipment redundancy applications. Create fault-tolerant systems with either simultaneous (gang) switching or independent control of each A/B switch.
These physical layer switches allow redundant systems to be automatically, remotely or manually operated, insuring maximum uptime for critical communication circuits.
Relay based switch modules insure communications, even when power is removed or control connections are down. This fail soft technology is optimized for applications including:
- Disaster Recovery
- Air Traffic Control
- Network Operations
- SCADA
|
- Computer Telephony
- Data Center Hotsite
- E911 Safety
- Trunking Redundancy
|
Network operations require 24/7/365 non-stop uptime. Insure your network uptime with Dataprobe redundancy solutions.
A/B switch cards are available in standard communication interfaces. Each A/B switch card includes the proper connectors; no additional interface modules are required. A/B switch cards support all the leads in their respective interfaces, making them ideal for a wide variety of circuit arrangements.
|
|
|
|
|
|
|
Control Options |
Dataprobe offers a variety of control options to facilitate design of reliable redundancy solutions. Each control card can be installed in either the RSS-16 or RSS-3 to provide either individual or gang control.
- IPC-16 Individual Control Card with IP and Serial Interfaces
- IPC-1 Gang Control Card with IP Interface
- IOC-16 Individual Control Card with GPIO (Contact Closure) Interface
- IOC-3 Gang and 3x Individual Control Card with GPIO Interface
|
IPC-16 Network and Serial Control Card
- Individual Control
- Web, Telnet, SNMP, Serial, UDP Messaging
The IPC-16 allows control resolution down to the A/B switch level. Each A/B switch can be individually managed, or gang switched as required.
Both serial and network interfaces provide communication with user friendly menus or web browser interfaces. Each A/B card in the system can be named for easy identification. Cards can be grouped and switched together or independently. For system developers, the RSS series offers direct command control, both via the serial port and via UDP network messaging. This allows direct program control by Network Management Systems, customized user interfaces, or easily integrated into OEM systems and software. RSS-16 Chassis offers Dual Redundant IPC-16 controllers for the most reliable configuration.
Both serial and network interfaces provide communication with user friendly menus or web browser interfaces. Each A/B card in the system can be named for easy identification. Cards can be grouped and switched together or independently. For system developers, the RSS series offers direct command control, both via the serial port and via UDP network messaging. This allows direct program control by Network Management Systems, customized user interfaces, or easily integrated into OEM systems and software.
|
IPC-16 Simple Web Interface |
IPC-1 Gang Network Control Card
Gang Control
Web, SNMP, TCP Messaging, AutoPing
For gang applications in either the RSS-3 or RSS-16 chassis, the
IPC-1 provides web control, setup and management. Point your browser to the IP address assigned to the switch, enter a security code and click on the button to operate the switch.
Fallback switching for your critical communication circuits is just a click away with these web enabled A/B Switches. Switch one Common circuit to either circuits A or B from anywhere in the world. Just point you browser to the IP address of the switch, enter a username and password and click on either A or B button to reroute traffic. It's that easy. In addition to the web browser control, these switches can also be operated by: Automatically, by pinging a device and switching automatically when the ping fails, from an SNMP Manager Direct TCP messages.
|
IPC-1 Web Interface for Gang Switching |
IOC-16 I/O Control Card
- Individual Control
- External Contact Closure, Relay Status Feedback
Use external relay closures or discrete inputs to integrate A/B Fallback switching into your network environment. Each switch is independently controlled with its own set of control inputs. For status information, a relay output is provided for positive switch confirmation.
All 16 inputs are terminated on one 50 Pin Telco connector, and another 50 Pin telco provides access to the status relays. |
|
IOC-3 I/O Control Card
- Gang Control
- External Contact Closure
Use external relay closures or discrete inputs to integrate A/B Fallback switching into your network environment. This card is ideal for Gang Controlled switching, or independant control of up to three A/B Switch cards. Terminal blocks are used to connect the control and feedback circuits.
Two additional modular jacks are used to link multiple chasses together for unlimited gang size and simultaneous switching of multiple circuits. |
|
|
|
|
Specifications |
RSS-16
4U
20 Slot Card nest
|
Physical |
19" W x 7.00" H x 7" D
Weight: 11.5 Lbs (w/o cards) |
Capacity |
A/B Switch Card Slots: 16
Control Card Slots: 2
Power Supply Slots: 2 |
|
RSS-3
1U
5 Slot Card Nest |
Physical |
19" W x 1.75" H x 7" D
Weight: 5.5 Lbs (w/o cards)
|
Capacity |
A/B Switch Card Slots: 3
Control Card Slots: 1
Power Supply Slots: 1 |
|
System Environmental |
Temperature |
Operating: 0 to 65 C
Storage: -10 to 85 C
|
Relative Humidity |
0 to 95% Non-Condensing |
|
Power Supply
PS-RSS-WRI |
Input Power |
Nominal : 120/240 VAC 50/60 Hz
Range : 100 - 240 VAC
Capacity: 50 Watts
Fusing: 2 A |
AC Input |
IEC 320C14
Linecord for North America Included |
Physical |
Internal Power Module. Inserts into RSS-16 or RSS-3 |
|
Power Supply
PS-RSS-48 |
Input Power |
Nominal : 48VDC
Range : 42 - 60 VDC
Watts: 75
Fusing: 2.5 A |
DC Input |
Screw Terminals |
Physical |
Internal Power Module. Inserts into RSS-16 or RSS-3 |
|
Power Supply
PS-WRI-4 |
Input Power |
Nominal : 120/240 VAC 50/60 Hz
Range : 100 - 240 VAC
Capacity: Watts: 50
Fusing: 2 A |
AC Input |
IEC 320 C14
Linecord for North America Included |
Physical |
External Power Supply
1.5"H x 2.4"W x 5.0"D
Cable to RSS-3 Control Card |
|
IPC-16
Network & Serial
Control Card |
Physical |
Width: One Control Slot in RSS-3 or RSS-16
Height: 7"
Depth: 6"
Weight: .5 lbs. |
Control Ports |
10/100 Network.
Supports: HTTP, Telnet, SNMP, UDP Messaging Protocol.
RS-232 Serial. D9 Male |
Additional Features |
Power connector for external 24VDC redundant supply
Dual Redundant Control Card option |
|
IPC-1
Network - Gang
Control Card |
Physical |
Width: Two Control Slots in RSS-3 or RSS-16
Height: 7"
Depth: 6"
Weight: .5 lbs. |
Control Ports |
10/100 Network
Supports: HTTP, Telnet, SNMP, UDP Messaging Protocol. |
Additional Features |
Power connector for external 24VDC redundant supply
AutoPing for Automatic Failover
Dual Redundant Control Card option |
|
IOC-3
I/O
Control Card |
Physical |
Width: One Control Slot in RSS-3 or RSS-16
Height: 7"
Depth: 6"
Weight: .5 lbs.< |
Connectors |
Switch Control: Screw Terminal Blocks
Gang In: 6 Wire Modular Jack
Gang Out: 6 Wire Modular Jack
Power In: 24VDC from PS-WRI-4 |
|
IOC-16
I/O
Control Card |
Physical |
Width: One Control Slot in RSS-3 or RSS-16
Height: 7"
Depth: 6"
Weight: .5 lbs. |
Connectors |
Control: 50 Pin Telco (Female)
Status Out: 50 Pin Telco (Female) |
|
A/B Switch Cards |
Physical |
Width: One A/B Slot in RSS-3 or RSS-16
Height: 7"
Depth: 6"
Weight: .5 lbs. |
Additional Features |
2 LED indicators for switch position
Manual Override Switch
Latching Relays. Switch maintains position in power or control failure. |
AB-D9-R |
9 Pin D'Subminiature, Female connectors.
All 9 Pins switched. |
AB-D15-R |
15 Pin D'Subminiature, Female connectors.
All 15 Pins switched.
|
AB-D25-R |
25 Pin D'Subminiature, Female. All 25 pins switched. Jumper options for frame and signal ground, switched or unswitched. |
AB-2RJ8-R |
Dual 8 Wire Modular Jack. Dual A/B switch card for all applications that use 8 Wire Modular Jack. Ethernet switching 10/100/1000. Both switches on this card switch simultaneously.
|
AB-2BNC-R |
Dual BNC, Female connectors.
Up to 45Mhz for E-1, DS-3 Applications.
Both switches on this card switch simultaneously. |
AB-T50-R |
50 Pin Telco (Amphenol). A/B connectors, Female. Common, Male.
Requires two card slots. |
AB-M34-R |
34 Pin M Connectors for V.35 Applications.
Requires two A/B Card slots.
19 Leads Supported: A
B
C
D
E
F
H
J
K
L
P
R
S
T
U
V
W
X
Y
AA
BB |
|
|
|
|
|
Learn More |
| Need Redundancy Switching? |
If you want to learn about minimizing downtime using our redundancy switching systems, please fill out our contact form. We will help you determine the optimum way to engineer a system to meet your needs. |
|
| Talk to our Application Engineers. |
|
|
|
|
|
