Thank you for your Purchase
Thank you for putting your trust in Dataprobe to help you manage your network and minimize downtime. We are dedicated to helping you get the most value possible from your purchase. If you ever have any questions, please don't hesitate to contact us.
Register your iBoot
Product Registration keeps you informed with the latest firmware releases, and important service announcements. Registered users get priority service support through the lifetime of ownership.
Register Now.
Tip #1: Download the Setup Utility
If you haven't already configured your iBoot, download the Device Management Utility (DMU) from the
iBoot Support Center. It provides the quickest and easiest way to get your iBoot (G2 or G2+) up and running fast. With the DMU you can:
- Set the IP address of any iBoot attached to your local network.
- Find all the iBoots on your network, regardless of IP Address
- Reset Forgotten Passwords and Factory Defaults
Tip #2: Quick Pairing of iPIO Units
If you purchased two units to use in pairs and communicate with one another, please note the following helpful tips:
- Set one unit up at a time. If you install both units on the same local network, make sure to set-up one unit with an IP address, then another. That way you don't run into address conflicts with factory default units.
- Once both units are set-up, configure one unit as a remote of the other. Open the browser of the unit that will use the Inputs, and click on Setup, then Remotes, then New Remote. Enter the IP Address and name of the new remote. Click Save to complete the setup.
- Advanced options for remote setup include security and channel assignment and configuration. These will be covered in the next Tips email. Look for it.
See More iPIO Tips and Tricks: |
#2 |
#3 |