Device Management Utility (DMU) Support

The Device Management Utiltiy program provides support for initial setup and ongoing management of Dataprobe Devices.

Currently supported devices are:

iBoot-PDU (all Models)

iBoot

iBoot-G2

iBoot-G2+

iBoot-G2S

iBoot-PoE

iBoot-PoE-P

iBoot-WiFi

iPIO-2, iPIO-8, iPIO-16

Currently supported devices are:

The curent version of the DMU is 1.32.35

DMU FUNCTIONS

Discover Dataprobe devices on the local network

Add Dataprobe Devices on remote networks

Open the browser

Upgrade the Firmware

Set the IP Address

Set the Network mode DHCP/static

Set the Network Parameters

Reset Administrator Password

Reset Factory Defaults

Not all functions available on All devices. See Chart Below

DMU SCREEN

DMU menu structure

Device

Learn more

Device

Learn more

Device

Learn more

Device

Learn more

Device

Learn more

Device

Device | Discover

Selecting Device Discover will send a network broadcast message that compatible Dataprobe devices will respond to. The program will present the list of all the responding Dataprobe devices on the local subnet in the table. The device is identified by Name…..[programmed name of device], Product ID…..[Product ID and version], IP Address…..[static or DHCP with current port], MAC Address…..[6 Hex numbers].

Device | Add

Device | Add

This selection allows the addition of Dataprobe devices on reachable networks other than the local subnet. Select Device Add, then enter the IP address of the device to be added. If it is reachable by the DMU, it will be added to the list.

This selection clears the list of all devices.

Manage

Manage | Open Browser

This selection opens the default browser to the IP address of the selected (highlighted) device.

Manage | Upgrade Firmware

Set

This selection allows upgrading the firmware of the selected device. Once this menu choice is made, enter the username and password with administrator credentials and then browse to locate the upgrade file. Each Dataprobe device has a unique suffix for its upgrade files. You can view the proper files using the Files of Type feature while browsing for files. * 

Before upgrading the firmware, insure that the Firmware Upgrade Enable feature is set to allow firmware upgrades.

Set | Network Settings

This selection allows changing of the IP address of the selected device. Setting the IP Address must be done within the first two minutes of powering up or resetting the device. Power cycle the device then enter the IP Address to be set. Some versions if iBoot-G2 you will be able to program the IP-Mode to DHCP or Static. When programmed as static, you can program IP Address, Subnet Mask, Gateway and DNS.

Set | Network Settings

IP Mode (DHCP)

IP Mode (Static)

Set | Factory Defaults

This selection resets all the settings to the Factory Defaults, WITH THE EXCEPTION OF THE NETWORK SETTINGS. Networks settings will remain to allow access to the device. This must be done within the first two minutes of powering up or resetting the device. There will be a confirm message before attempting the reset. * If you need to reset defaults including the network settings, hold the reset button for more than 5 seconds to initiate factory reset. (see manual for details)

Set | Admin Password

When available, this selection resets only the administrator password to the Factory Default. (admin) This must be done within the first two minutes of powering up or resetting the device. There will be a confirm message before attempting the reset.

Set | Local Address

This selection allows computers with multiple physical subnets (i.e. wired and wireless) to discover Dataprobe devices on each of the computers subnets. Once this selection is made, choose an IP address from the drop down list. The DMU will only discover devices on the same physical subnet as is selected here.

Help

Help | Online Help

Accesses this web page.

Help | About

Displays version number for DMU program and other relevant information.

DMU Features per supported Product

Get Support Help

Phone

201-934-5111

Dataprobe Warranty

All Dataprobe products are covered by our Standard 3 Year Warranty. Click here for complete information. View Warranty Extended Warranties are available.

Product Registration

Get the most out of your product. Registered owners get important bulletins, learn new tips, and hear about product developments first.

Start a Support Ticket