Revision History – iBoot-G2+

These revisions refer to iBoot-G2+ model number 1410035.
iBoot-G2+ Upgrade requires the use of the DMU program available here:

• Click Here for DMU download

Information about the DMU program is available online here:

• Click Here for the Support page for the DMU

Upgrade method is described in the standard iBoot-G2+ manual available here: Click Here for current Manual

The Quick Start Guide for the iBoot-G2+ is available here: Click Here for current Quick Start Manual

iBoot Utility with Heartbeat Generator and Graceful Shutdown Utility available here: setup_iboot_utility_v2.10.09.exe
And manual for the iBoot Utility here: iboot_utility_v130917e.pdf

__________

1.61.116 (Jun 2022) This version improves the following features:

• Corrected minor DHCP / Layer 3 Issue
• Change Long Poll acknowledgement from raw to HTTP Post
• Removed Configuration / Provisioning race condition.
• Proxy Servers employing Zero Trust technology will no longer need to enable HTTP bypass.  (caused some networks to repeat cloud commands)

__________
1.52.100 (Jun 2021) This version improves the following features:

• Further Improved iBoot-G2+ to iBCS communication
• Necessary for impaired networks
• Recommended for Cellular and DSL Internet connections

Download iboot-g2s_v1.52.100.g2u [ 288Kb ] here: Click Here

The iBoot-G2+ manual for this version is available here: Click Here for this version Manual
The iBoot-G2+ Quick start manual for this version is here: Click Here for this Quick start Manual
__________
With the exception of the network settings, upgrading code from 1.31.12 or older will reset factory defaults.

• (The network settings will not be affected)

If you register to the cloud and receive the “Error: All Ready Registered” message instead of the code:

• Factory default has cleared the old registration code and you will need a new one.
• Delete the device from the cloud account in order to re-register to the cloud.
• You can delete the device before or after the upgrade.

__________
1.50.98 (Mar 2021) This version improves the following features:

• Updated TCP/IP Stack to better support Layer3 Switching
• Add support for Configure from the Cloud with API
• Updated default passwords to be unique in every iBoot (now based on MAC)
• Improved iBoot-G2+ to iBCS communication
• Minor Bug Fixes

Download iboot-g2s_v1.50.98.g2u [ 288Kb ] here: Click Here

The iBoot-G2+ manual for this version is available here: Click Here for this version Manual
The iBoot-G2+ Quick start manual for this version is here: Click Here for this Quick start Manual
__________
1.42.86 (Dec 2020) This version improves the following features:

• Corrected Layer 3 Networking Issues

Download iboot-g2plus_v1.42.86.g2u [ 252Kb ] here: Click Here
The iBoot-G2+ manual for this version is available here: Click Here for this version Manual
The iBoot-G2+ Quick start manual for this version is here: Click Here for this Quick start Manual
__________
1.41.61 (Mar 2019) This version improves the following features:

• Improved DHCP function
  (Lease time renewal)

Additional New Hardware improvement (Serial numbers xxxxxxx 001 xxxxx and above)

• All variables stored EEPROM (not FLASH)

Existing iBoot-G2S Hardware (serial number xxxxxxx 000 xxxxx)
uses Flash RAM and will display iBoot-G2+ logos and default names, but the switch will still function as normal.

Download iboot-g2s_v1.41.61.g2u [ 252Kb ] here: Click Here
The iBoot-G2+ manual for this version is available here: Click Here for this version Manual
The iBoot-G2+ Quick start manual for this version is here: Click Here for this Quick start Manual
__________
1.40.60 (Aug 2018) This version address adds or improves the following features:

• Improved Soft Reboot Reliability
• Refreshed Webpage Interface
• Refreshed Mobile Web Page Interface
• Fixed iBoot In Use Error Message Issues
• Improved Operation with Safari on apple MAC
• Access by Name using LLMNR on networks that support it
• Added a Disable Off feature to not allow an outlet remain off
• Send Location Name to the Cloud when registering
  (feature enabled when cloud interface updated)
• Hide any unused expansion ports from status page
• Name the outlets
• Scheduled events increased to 14
• Daylight Savings Time CLI commands added
• DST Start and Stop settings for Southern Hemisphere fixed
• Other Operational Improvements and Bug FixesAdditional New Hardware improvement
• All variables stored EEPROM (not FLASH)

Download iboot-g2plus_v1.40.60.g2u [ 252Kb ] here: Click Here
The iBoot-G2+ manual for this version is available here: Click Here for this version Manual
The iBoot-G2+ Quick start manual for this version is here: Click Here for this Quick start Manual
__________
1.31.164 (Mar 2016) This version address adds or improves the following features:

• February Scheduled Events did not work in a leap year
• Can’t set February 29th in a leap year

Download iboot-g2plus_v1.31.164.g2u [ 227Kb ] here: Click Here
The iBoot-G2+ manual for this version is available here: Click Here for this version Manual
The iBoot-G2+ Quick start manual for this version is here: Click Here for this Quick start Manual
__________
1.30.161 (Dec 2015) This version address the following issue:

• DHCP is Default
• DHCP assigned address will allow firmware upgrade
• DHCP feature improvement
• URL Control with response
• URL Query status
• Time Server – URL or IP Address
• Time Server – Daylight Savings Available
• Scheduled Events – Place event on Hold
• Autoping – Ping URL or IP Address
• Autoping – Restart delay timer setting
• iBoot Cloud Service reliablity improved
• Mobile webpages improved

Download iboot-g2plus_v1.30.161.g2u [ 227Kb ] here: Click Here
The iBoot-G2+ manual for this version is available here: Click Here for this version Manual
The iBoot-G2+ Quick start manual for this version is here: Click Here for this Quick start Manual
__________
1.21.80 (May 2014) This version address the following issue:

• iBoot Cloud Service – BETA can be enabled and made available as alternate method to access iBoot through a firewall or dynamically assigned Public IP
  View Service Bulletin:

Download iboot-g2plus_v1.21.80.g2u [ 231Kb ] here: Click Here
The iBoot-G2+ manual for this version is available here: Click Here for this version Manual
__________
1.13.79 (Oct 2013) This version address the following issue:

• Intermittent Soft Reboot Failure
  View Service Bulletin:

Download iboot-g2plus_v1.13.79.g2u [ 231Kb ] here: Click Here
The iBoot-G2+ manual for this version is available here: Click Here for this version Manual
__________
1.12.73 (Sep 2013) This version address the following issues:

• Bug fix: Initial State setting to Last not saving under certain conditions
• Bug fix: CLI Command set exp1 initial state typo

1.11.47 (Jan 2013) This version address the following issues:

• Bug fix: CLI command display issue with get events

1.11.46 (Dec 2012) This version address the following issues:

• Added Mobile Pages
• User Login required/not required
• DxP uses Username Password (interact with iPIO-8)
• Internal Log for some events
• Time Zone issue resolved
• Temporary Hold a scheduled event
• Set the time for autoping response (ping time)
• Cycle is programmable as cycle x times
• Linkback URL for logout link
• New Logo
• Program initial state (on,off last)
• Identify type with DMU version 1.10.11.14
• Added Delay time for Expansion outlets
• Added local control from Hardware input
• Added Graceful shutdown mode

Download iBoot-G2+_v1.12.73.g2u [ 231Kb ] here: Click Here
The iBoot-G2+ manual for this version is available here: Click Here for this version Manual
__________
1.0b.14 (May 2011) This version address the following issues:

• Bug Fix for Heartbeat Cycle Once Function.

Download iBoot-G2+_v1.0b.14.g2u [ 134Kb ] here: Click Here
The iBoot-G2+ manual for this version is available here: Click Here for this version Manual
__________
1.00.12 (Aug 2010)

• This was the initial release:

Download iBoot-G2+_v1.00.12.g2u [ 129Kb ] here: Click Here
The iBoot-G2+ manual for this version is available here: Click Here for this version Manual