Downtime happens even to the most robust networks systems. The power grid is entirely out of your hands. Depending on quality and load on your local infrastructure, power surges or outages may be frequent.
Discover your Cost of Downtime and how fast your ROI on iBoot will be
iBoot-G2 Status Page
Clean web page design makes it easy to see the status and control power to any outlet. History log shows the last 5 events.
Adaptive mobile pages make it easy to make that quick reboot from you smartphone while on the go.
Simplify Wiring and Installation Costs
Perfect for Existing Installations
Get the reboot you need without an unnecessary cable run to the wiring closet. With Model iBoot-G2S, the built-in 10/100 switch makes it easy to add the power of iBoot to your existing installation. Perfect for digial signage, kiosks and telemetry systems in those hard to reach areas. Putting the iBoot in-line between the router and the server makes it easy to test both and reboot automatically.
iBoot Cloud Service (iBCS) allows customers with iBoot to access and control multiple iBoots in multiple locations from a single portal with a single sign-on.
iBCS will not only make using iBoots easier, by consolidating all units into one sign-on and interface, it will also enhance the number of situations where iBoot can be deployed.
AutoPing
iBoot automatically monitors and protects your network. AutoPing continuously tests your connectivity to the internet or to any device on your network. When the network is down, or the device stops functioning, iBoot reboots the failed system to get you back on-line fast.
For servers, the Heartbeat service generates a “I’M OK” message from your server to iBoot. When that message dissapears, iBoot will reboot the server, using Graceful Shutdown if possible prior to using power off to reboot the crashed system.
Scheduling
With iBoot’s real time scheduler, you can use regular reboots to insure a fresh start each day. Power Up and Down equipment as needed to minimze energy consumption, heat and extend product life. Turn off equipment automatically when not needed for security and access control.
iBoot-G2S and iBoot-G2+ are expandable with low cost satellite units to provide independent control of up to three outlets, with separate AutoPing monitoring as needed. If not used with the expansion units, the ports on the iBoot-G2S can be used as General Purpose I/O or as manual override control for the power outlets.
iBoot-G2+ and -G2S Expansion ports can be used to connect to manual switches or alarm relays for local outlet control. The digital outputs can be use to control external equipment, like a notificaion lamp or as input to an alarm panel.
Dataprobe Remote Reboot products are UL Listed. This means they are tested by Underwriters Labratories and Certified to meet their exacting standards. It also means that the tests conducted are appropriate for the type of device under test. Only devices that are tested and pass all the tests conducted by UL can apply the UL label.
Dataprobe PDUs are listed under UL 60950-1, and as such are designed for stricter data center environments. Only UL 60950-1 insures that PDUs offer appropriate branch circuit protection.
Other companies use independent labs that test to UL standards. These may or may not be the appropriate safety standards. It is very easy to say tested to UL standards, but that might be for noise emissions or something other than fire safety. Some companies completely forgo safety testing!
iBoot Cloud Service (iBCS) allows customers to access and control multiple power switches in multiple locations from a single portal with a single sign-on.
Having one web interface for all remote locations will not only make using the remote power switches easier, by consolidating all units into one sign-on and interface, it will also enhance the number of situations where iBoot can be deployed.
iBoot automatically monitors and protects your network. AutoPing continuously tests your connectivity to the internet or to any device on your network. When the network is down, or the device stops functioning, iBoot reboots the failed system to get you back on-line fast.
For servers, the Heartbeat service generates a “I’M OK” message from your server to iBoot. When that message disappears, iBoot will reboot the server, using Graceful Shutdown if possible prior to using power off to reboot the crashed system.
With iBoot’s real time scheduler, you can use regular reboots to insure a fresh start each day.
Power Up and Down equipment as needed to minimze energy consumption, heat and extend product life.Turn off equipment automatically when not needed for security and access control.
With a remote power switch, you have infinite options to control your devices from anywhere in the world.
Dataprobe Remote Reboot products are UL Listed. This means they are tested by Underwriters Labratories and Certified to meet their exacting standards. It also means that the tests conducted are appropriate for the type of device under test. Only devices that are tested and pass all the tests conducted by UL can apply the UL label.
Dataprobe PDUs are listed under UL 60950-1, and as such are designed for stricter data center environments. Only UL 60950-1 insures that PDUs offer appropriate branch circuit protection.
Other companies use independent labs that test to UL standards. These may or may not be the appropriate safety standards. It is very easy to say tested to UL standards, but that might be for noise emissions or something other than fire safety. Some companies completely forgo safety testing!
Get the remote reboot you need without unnecessary cable runs to the wiring closet. With Model iBoot-G2S, the built-in 10/100 switch makes it easy to add web power switch capabilities to your existing installation. Perfect for digital signage, kiosks and telemetry systems in hard to reach areas. Putting the iBoot in-line between the router and the server makes it easy to test both and reboot automatically.