Revision History – iBoot-G2+
These revisions refer to iBoot-G2+ model number 1410035.
iBoot-G2+ Upgrade requires the use of the DMU program available here:
Information about the DMU program is available online here:
Upgrade method is described in the standard iBoot-G2+ manual available here: Click Here for current Manual
The Quick Start Guide for the iBoot-G2+ is available here: Click Here for current Quick Start Manual
iBoot Utility with Heartbeat Generator and Graceful Shutdown Utility available here: setup_iboot_utility_v2.10.09.exe
And manual for the iBoot Utility here: iboot_utility_v130917e.pdf
__________
1.61.116 (Jun 2022) This version improves the following features:
- Corrected minor DHCP / Layer 3 Issue
- Change Long Poll acknowledgement from raw to HTTP Post
- Removed Configuration / Provisioning race condition.
- Proxy Servers employing Zero Trust technology will no longer need to enable HTTP bypass. (caused some networks to repeat cloud commands)
Download iboot-g2s_v1.61.116.g2u [ 288Kb ]: Click Here
The iBoot-G2+ manual for this version is available: Click Here
The iBoot-G2+ Quick start manual for this version : Click Here
__________
1.52.100 (Jun 2021) This version improves the following features:
- Further Improved iBoot-G2+ to iBCS communication
- Necessary for impaired networks
- Recommended for Cellular and DSL Internet connections
Download iboot-g2s_v1.52.100.g2u [ 288Kb ] here: Click Here
The iBoot-G2+ manual for this version is available here: Click Here for this version Manual
The iBoot-G2+ Quick start manual for this version is here: Click Here for this Quick start Manual
__________
With the exception of the network settings, upgrading code from 1.31.12 or older will reset factory defaults.
- (The network settings will not be affected)
If you register to the cloud and receive the “Error: All Ready Registered” message instead of the code:
- Factory default has cleared the old registration code and you will need a new one.
- Delete the device from the cloud account in order to re-register to the cloud.
- You can delete the device before or after the upgrade.
__________
1.50.98 (Mar 2021) This version improves the following features:
- Updated TCP/IP Stack to better support Layer3 Switching
- Add support for Configure from the Cloud with API
- Updated default passwords to be unique in every iBoot (now based on MAC)
- Improved iBoot-G2+ to iBCS communication
- Minor Bug Fixes
Download iboot-g2s_v1.50.98.g2u [ 288Kb ] here: Click Here
The iBoot-G2+ manual for this version is available here: Click Here for this version Manual
The iBoot-G2+ Quick start manual for this version is here: Click Here for this Quick start Manual
__________
1.42.86 (Dec 2020) This version improves the following features:
- Corrected Layer 3 Networking Issues
Download iboot-g2plus_v1.42.86.g2u [ 252Kb ] here: Click Here
The iBoot-G2+ manual for this version is available here: Click Here for this version Manual
The iBoot-G2+ Quick start manual for this version is here: Click Here for this Quick start Manual
__________
1.41.61 (Mar 2019) This version improves the following features:
- Improved DHCP function
(Lease time renewal)
Additional New Hardware improvement (Serial numbers xxxxxxx 001 xxxxx and above)
- All variables stored EEPROM (not FLASH)
Existing iBoot-G2S Hardware (serial number xxxxxxx 000 xxxxx)
uses Flash RAM and will display iBoot-G2+ logos and default names, but the switch will still function as normal.
Download iboot-g2s_v1.41.61.g2u [ 252Kb ] here: Click Here
The iBoot-G2+ manual for this version is available here: Click Here for this version Manual
The iBoot-G2+ Quick start manual for this version is here: Click Here for this Quick start Manual
__________
1.40.60 (Aug 2018) This version address adds or improves the following features:
- Improved Soft Reboot Reliability
- Refreshed Webpage Interface
- Refreshed Mobile Web Page Interface
- Fixed iBoot In Use Error Message Issues
- Improved Operation with Safari on apple MAC
- Access by Name using LLMNR on networks that support it
- Added a Disable Off feature to not allow an outlet remain off
- Send Location Name to the Cloud when registering
(feature enabled when cloud interface updated) - Hide any unused expansion ports from status page
- Name the outlets
- Scheduled events increased to 14
- Daylight Savings Time CLI commands added
- DST Start and Stop settings for Southern Hemisphere fixed
- Other Operational Improvements and Bug FixesAdditional New Hardware improvement
- All variables stored EEPROM (not FLASH)
Download iboot-g2plus_v1.40.60.g2u [ 252Kb ] here: Click Here
The iBoot-G2+ manual for this version is available here: Click Here for this version Manual
The iBoot-G2+ Quick start manual for this version is here: Click Here for this Quick start Manual
__________
1.31.164 (Mar 2016) This version address adds or improves the following features:
- February Scheduled Events did not work in a leap year
- Can’t set February 29th in a leap year
Download iboot-g2plus_v1.31.164.g2u [ 227Kb ] here: Click Here
The iBoot-G2+ manual for this version is available here: Click Here for this version Manual
The iBoot-G2+ Quick start manual for this version is here: Click Here for this Quick start Manual
__________
1.30.161 (Dec 2015) This version address the following issue:
- DHCP is Default
- DHCP assigned address will allow firmware upgrade
- DHCP feature improvement
- URL Control with response
- URL Query status
- Time Server – URL or IP Address
- Time Server – Daylight Savings Available
- Scheduled Events – Place event on Hold
- Autoping – Ping URL or IP Address
- Autoping – Restart delay timer setting
- iBoot Cloud Service reliablity improved
- Mobile webpages improved
Download iboot-g2plus_v1.30.161.g2u [ 227Kb ] here: Click Here
The iBoot-G2+ manual for this version is available here: Click Here for this version Manual
The iBoot-G2+ Quick start manual for this version is here: Click Here for this Quick start Manual
__________
1.21.80 (May 2014) This version address the following issue:
- iBoot Cloud Service – BETA can be enabled and made available as alternate method to access iBoot through a firewall or dynamically assigned Public IP
Download iboot-g2plus_v1.21.80.g2u [ 231Kb ] here: Click Here
The iBoot-G2+ manual for this version is available here: Click Here for this version Manual
__________
1.13.79 (Oct 2013) This version address the following issue:
- Intermittent Soft Reboot Failure
Download iboot-g2plus_v1.13.79.g2u [ 231Kb ] here: Click Here
The iBoot-G2+ manual for this version is available here: Click Here for this version Manual
__________
1.12.73 (Sep 2013) This version address the following issues:
- Bug fix: Initial State setting to Last not saving under certain conditions
- Bug fix: CLI Command set exp1 initial state typo
1.11.47 (Jan 2013) This version address the following issues:
- Bug fix: CLI command display issue with get events
1.11.46 (Dec 2012) This version address the following issues:
- Added Mobile Pages
- User Login required/not required
- DxP uses Username Password (interact with iPIO-8)
- Internal Log for some events
- Time Zone issue resolved
- Temporary Hold a scheduled event
- Set the time for autoping response (ping time)
- Cycle is programmable as cycle x times
- Linkback URL for logout link
- New Logo
- Program initial state (on,off last)
- Identify type with DMU version 1.10.11.14
- Added Delay time for Expansion outlets
- Added local control from Hardware input
- Added Graceful shutdown mode
Download iBoot-G2+_v1.12.73.g2u [ 231Kb ] here: Click Here
The iBoot-G2+ manual for this version is available here: Click Here for this version Manual
__________
1.0b.14 (May 2011) This version address the following issues:
- Bug Fix for Heartbeat Cycle Once Function.
Download iBoot-G2+_v1.0b.14.g2u [ 134Kb ] here: Click Here
The iBoot-G2+ manual for this version is available here: Click Here for this version Manual
__________
1.00.12 (Aug 2010)
- This was the initial release:
Download iBoot-G2+_v1.00.12.g2u [ 129Kb ] here: Click Here
The iBoot-G2+ manual for this version is available here: Click Here for this version Manual