Protect Your Network with DATAPROBE's AutoPing

We get a lot of calls for our old PowerPal phone line power controller.  When we tell them that the iBoot does the same thing over the network they often reply: “But the network is the thing that is failing and needs to be rebooted!”

Thank heavens we invented AutoPing!

The AutoPing feature allows iBoot to automatically detect when the network fails and automatically reboots your router, cable modem, DSL or anything else that caused the freeze-up in the first place.

I have one in my basement that continuously ‘pings’ through my home network out to the internet.  Every time the cable company locks up, iBoot senses that and automatically reboots everything right away.  No more calls from from the kids that they can’t play XBox or stream Netflix.

Anyone who wants to keep their network up and running and avoid whiny kids (or bosses) should get one and make their troubles a thing of the past.

You can do even more than that

With AutoPing, you control the timing of the ping tests and how many fails it needs before it takes action.  Maybe you want to shut something down when something else is off line – AutoPing can do that.  Maybe you want to fire up an alert signal when something important fails – AutoPing can do that too!

AutoPing Setup is Easy

The  iBoot-G2 has two IP Addresses that you can set for AutoPing.  The basic setup uses one IP Address.  If you want to test more than one IP you can add the second address, then select the logical AND or OR mode to set which ones have to fail before action is taken.  Set the Frequency in seconds and the Fail Count independently for each IP Address.  Finally set the Action.  AutoPing supports several options here: