iBoot Original Version with Hub

This version of iBoot has a built in hub to elinimate the need for a separate cable run for power control.

iBoot® is a 10/100 Ethernet network attached, IP addressed, Web Controlled power switch. Anyone with a web browser can access iBoot® to perform power On, Off or Reboot (timed power shutdown). iBoot® is password protected for security.

iBoot® for AC power uses international standard IEC320 Connections and is auto sensing for worldwide use. Line cord and Output Cord are included for North America. iBoot® handles circuits up to 12 Amps (10 Amps at 230VAC). iBoot®-DC supports 5 – 48VDC up to 12 Amps.

Remote Power Control from your Web Browser

Just point your browser to iBoot’s IP address, enter the Password and you’re one click away from power ON, OFF or a timed Reboot.  It’s that simple.

The unique Auto-Ping feature allows iBoot® to monitor any IP device on the network and take automatic action whenever the device is down.
Read all about Auto-Ping

The new Heartbeat Detect feature allows iBoot® to monitor any server or PC running either the free Heartbeat Generator Program, or heartbeats integrated into your custom software. Dataprobe can provide developer support to make integration easy.   
Find out all about Heartbeat Detector and the Protocol.


iBoot-Hub Original Version


This is the Original Version of the iBoot. There are several reasons to use this version:

    1. The built-in 2 port hub. This allows iBoot to be installed where there is only one cable run to the wiring closet and that run needs to support the iBoot and another device. This would be typical where the iBoot is being added to an existing system removed from the closest hub or switch.
  1. The two units use different protocols for machine to machine communication. If you have written code to communicate with the original iBoot, it will not work, without modifications with the “G2 Series” units. As these protocols are different, so are the software tools that are used for discovery, setup and control.

On the other hand, for customers who are not restricted by the two conditions above, the iBoot G2 Series offers several advantages:

  1. Significantly lower cost
  2. Time of Day Scheduling
  3. Enhanced AutoPing
  4. Telnet control and setup

In addition the iBoot-G2+ (1410035) unit offers these enhancements over the base iBoot-G2 (1410034)

  1. USB port for direct connection to a PC or laptop for out-of-band setup, control and heartbeat keepalive
  2. Graceful shutdown of Windows PCs and Servers
  3. Expansion port that can be used for connection to two low cost expansion units, providing up to three indignantly controllable power outlets. When the expansion units are not used the ports can be used as generic I/O or as manual control of the power outlet.

Find out more about iBoot-G2 and iBoot-G2+

UL.cUL.LabelAll iBoot® units are UL approved and CE marked for safety. We understand that the reliability and safety of your network and facilities come first.

Back to top

Automatic Downtime Reboot

Dataprobe AutopingWatch the video to see AutoPing in Action


iBoot® automatically monitors and protects your network. AutoPing continuously tests your connectivity to the internet or to any device on your network. When the network is down, or the device stops functioning, iBoot® reboots the failed system to get you back on-line fast.

You have complete control of the AutoPing parameters, setting the frequency of the tests, the number of tests required to take action, and what action is to be taken when the failure is detected. Perfect for:

  • Cable Modems
  • Routers
  • DSL
  • Web Cams
AutoPing automatic reboot for network crashes.


The Heartbeat Function provides a deeper inspection of Windows based PCs and Servers. A service app is installed and continuously notifies the iBoot that all is well. When the heartbeat stops, the iBoot springs into action to do ‘Computer CPR’ to get the system back on-line.

The iBoot-G2+ can furthermore attempt a graceful shutdown or restart of the server to forestall a hard power cycle of shutdown.

iBoot-Hub Features

Web Browser Power Control

Clean Web page design for immediate status and power control. Auto detects mobile browsers. No special software required.

Automatic System Restoral

AutoPing and Heartbeat detect network or equipment outage and takes immediate action to restore your network or device.

Built in Hub

Reduce cabling and simplify installation. One cable from you network closet serves both the iBoot® and server, kiosk, etc. Auto-sensing for uplink/downlink eliminates the need for expensive crossover cables.

UL Listed

We take your safety seriously. Be confident to pass fire marshal inspections.

Dual Password Protected

Separate user and administrator passwords. Deploy iBoots throughout your organization.

IP Addressed, 10/100 Base-T

Use on any Ethernet IP network. Public or private. Supports DHCP and alternate ports for Web Access.

Direct TCP and Software Control

Control iBoot directly from your software application for the highest degree of power control integration. Simple protocol is freely available. Use iBoot control program to call power control from any network management system. IPSentry What’sUp Gold, etc.

110/220 VAC Operation

Auto ranging power input. Deploy iBoot anywhere in the world. iBoot uses IEC320 Connectors and includes line and extension cords for North America.

12 Amp Switching

Current for most Servers, Routers, Kiosks, etc. 10 Amps at 220 VAC.


Back to top



iBoot Status

Clean web page design makes it easy to see the status and control power.






All the setup is done though the web browser. Easily make changes and configure for optimum use.





Back to top




105 – 240 VAC Auto Ranging

Power Switching

12 Amps at 105-125 VAC,
10 Amps at  210-240 VAC

Power Connectors

Power Inlet: IEC 320 C13 Plug.
Line cord for North America Included.
16AWGX3C x 6’/2m
Power Out: IEC 320 C14 Receptacle.
Extension Cord for N. America Included.
16AWGX3C x 2’/60cm


Dual 10/100base-T, Built in Hub.
Auto sensing Uplink/Downlink
Cat 5 Cable Included


IP Addressable. DHCP or Static
HTTP Web Server built-in, Port Assignable
TCP Messaging Protocol
Auto-Ping TCP Protocol
Heartbeat Detector Protocol


Dual Password Protected, User and Admin


Height 2.25 in. Width 4.50 in. Depth 6.00 in. Weight 1.25 lb.
Operating Temperature 0 to 40 Deg. C


MTBF 160,100 Hours
Operating Cycles 10,000,000 Mechanical. 100,000 at Maximum Load


UL/cUL UL60950
Listed I.T.E File No. E225914
CE Directives 89/336/EEC, 92/31/EEC and 93/68/EEC
FCC Part 15 Class B


Back to top

Models and Pricing



Call to Order

Demo iBoot Now

Have Questions?

Contact Us

  • Application assistance?
  • Need a large quantity?
  • Modifications? OEM?
By submitting this information I agree to receive occasional information from Dataprobe. We will never distribute your information to anyone else. Manage your email preferences at any time.

All iBoot Models


Standard Model


Advanced Model


With Network Switch


DC Power Version


WiFi Version


8 Outlet PDU

iBoot News: